a
- A Hilbert Transform Based Algorithm for Detection of a Complex Envelope of a Power Grid Signals – an Implementation
- A Hybrid Parallel Active Filter / Off-Line UPS Unit for Computer Loads
- A Hybrid Reference Signal Generator for Active Compensators
- A multi-pulse diode rectifier with a coupled three-phase reactor
- A New Closed Loop Speed Control Strategy for a Vector Controlled Three- Phase Induction Motor Drive
- A New Vision of PQ Research for the Next 10 Years
- A Poynting Vector Approach to the Study of Power Flow through a Transformer
- A Quality Information System Based on Distributed Data Acquisition
- A Virtual Instrument for Time-Frequency Analysis of Park Power Components
- About the Rejection of Poynting Vector in Power Systems Analysis
- Active Current, Reactive Current, Kirchhoff's Laws and Tellegen’s Theorem
- Additional losses by magnetic field harmonics in the rotor bars of asynchronous machines and their influence
- Advantages of changing 3-phase arc furnaces asymmetry estimation criteria in international and european standards
- Amplitude and Phase Modulation Effects of Waveform Distortion in Power Systems
- An Advanced Approach to Process Hardening
- An Assessment of Power Quality and Electricity Consumer’s Rights in Restructured Electricity Market in Turkey
- An Improved Model of a Three phase Induction Motor Incorporating the Parameter Variations
- An optimum reactance one-port compensator for harmonic mitigation
- Analysis of a TSC Failure in a Steel Mill Industry
- Analysis of IGCT turn-on transients in circuit configurations with series connected diodes
- Analysis of operation of class E ZVS resonant inverter
- Analysis of Power Quality in High-Tech Facilities
- Analysis of Vienna rectifier
- Application Note: Energy Efficiency in Hospitals
- Application of Z-source converter in photovoltaic grid-connected transformer-less inverter
- Assessment of Fault Location in Power Distribution Networks
- ATP/EMTP Study of Ferroresonance Involving HV Inductive VT and Circuit Breaker Capacitance
c
- Capacitive Coupling And Parasitic Capacitances of Converter’s – EMC
- CIGRE/CIRED/UIE JWG C4.110, Voltage dip immunity of equipment in installations
- Classical control of the neutral point in 4-wire 3-phase DC-AC converters
- Classification Methodologies for Power Quality
- Compensation Techniques Based on Reactive Power Conservation
- Computer-Based Voltage Dip Assessment in Transmission and Distribution Networks
- Concentration photovoltaics - Technology
- Conducted EMI Mitigation in Switched Mode DC-DC Converters by Spread Spectrum Techniques
- Conducted EMI Propagation in Inverter-Fed AC Motor
- Contactless multipolar double-fed asynchronous generator for windmills
- Control circuit for series active power filters based on programmable logic devices
- Cost-Benefit Analysis of Solutions Protecting Industrial Processes with Variable Speed Drives Against Voltage Sags
- Creating a Regulatory Framework for Voltage Quality
- Currents Physical Components in Circuits with Nonsinusoidal Voltages and Currents - Part 2: Three-Phase Linear Circuits
- Currents' physical components (CPC) in circuits with nonsinusoidal voltages and currents - part 1: single-phase linear circuits
- Current’s physical components theory and p-q power theory in the control of the three-phase shunt active power filter
d
- Decomposition of EMI Noise into Common and Differential Modes in PWM Inverter Drive System
- Design and Testing of a Low Cost Peak-Power Tracking Controller for a Fixed Blade 1.2 kVA Wind Turbine
- Design of DC Permanent Magnet Disc Motor and improving its EMC
- Developments of Power Quality studies in Electric Transportation System
- Diagnostics of Commutator DC Motor Basing on Spectral Analysis of Signals
- Digitally controlled interface between supercapacitor energy storage and DC link
- Distributed Generation in Future Grids: Will 'Energy Islands' Become a Reality?
- Dynamic Current Limitation to Provide Interactive Features of Power-Electronics Interfaced Distributed Generation
e
- Energy Storage Technology for Performance Enhancement of Power Systems
- Economic Evaluation of Solution Alternatives for Voltage Sags and Momentary Interruptions
- Effect of PQ-Monitor Connection on Voltage Dip Indices: PN vs PP Voltages
- Effects of Source Voltage Harmonics on Power Factor Compensation in AC Chopper Circuits
- Electrical Diversions and Amusements
- Electromagnetic Compatibility (EMC) Concerns for Distributed Generation Technologies
- Electromagnetic Coupling of the Electrical Drive – EMC (Part I)
- Electromagnetic Coupling of the Electrical Drive – EMC (Part II)
- Electromagnetically excited audible noise - evaluation and optimisation of electrical machines by numerical simulation
- EMC shielding in power electronics multilayers
- Energetic parameters of induction motors as the basis of energy saving in a variable speed drive
- Energy Consumption of Water Pumping for Selected Control Systems
- Energy efficiency in buildings demystified
- Energy Efficiency in District Heating
- Energy Efficiency in Industrial Processes: A case study of an automated pneumatic waste collection
- Energy efficiency of distribution transformers in Europe
- Environmental EMC aspects of resistance welding equipment
- EPQU Journal Vol 12 Issue 2 summary
- EPQU Journal Volume 13 Issue 2
- EPQU Magazine Volume 3 Issue 1
- EPQU Magazine Volume 3 Issue 2
- Estimation of Voltage Unbalance in Power Systems Supplying High Speed Railway
- EU poor power quality : an economic impact >€150bn
- Evolution of electrical design practice in office buildings
- Experience with Regulation of Network Quality in Italy, the UK and The Netherlands
- Experimental Investigations of the Upqc Arrangement
- Extreme possibilities of circuital models of electrical machines
h
- Handbook of Power Quality
- Harmonic Analyses and Mitigation in Large Industrial Steel Plants - A Case Study
- Harmonic compensation using the sliding DFT algorithm for three-phase active power filter
- Harmonic Domain Modelling of Transformer Core Nonlinearities Using the DIgSILENT PowerFactory Software
- Hybrid UPS Based on Supercapacitor Energy Storage and Adjustable Speed Generator
i
- Impact of embedded generation on the voltage quality of distribution networks
- Impact of Multi-Cycle Symmetrical Control on Power System
- Implementation of a digital signal processor-controlled shunt active filter
- Influences of a “Hybrid Grid” on the Network’s Voltage Quality and Supply Reliability
- Intelligent building systems as a tool for monitoring power consumption and quality in a building
- Interharmonics Generated by Induction Machines
- Intrinsic Power: Some Observations
- Investigations on the controllability and the design of DC/DC convertors connected to PV-generators
m
- Mitigation of voltage flicker by superconducting synchronous condenser (supervar)
- Maintenance as a tool ...
- Mathematical Model of DC Motor for Analysis of Commutation Processes
- Measuring accuracy of electric energy in HV power networks
- Method of Selection of dv/dt for EMI Current Ringing Attenuation
- Methods of voltage unbalance estimation in electric power networks
- Mitigation of the wind generation integration related power quality issues by energy storage
- Modelling and analysis of the Quadrature-booster phase shifter with PWM AC bipolar matrix-reactance chopper and passive load
- Modern 3D Modelling, Visualization and Animation at Power Electrical Engineering Study Programme
- Multiresonant ZVS boost convertor
- Multiresonant ZVS CUK convertor
- Mutual Interaction between a Harmonic Load and the Feeding Transformer
o
- On Line Diagnostic Monitoring for Large Power Transformers
- On the thickness of phosphor coating in fluorescent lamps and its impact on selected light parameters
- Optimal number and location of measurement instruments in distributed systems for Harmonic State Estimation
- Optimal placement and sizing of distributed generator units using genetic optimization algorithms
- Optimum EMC design of flyback and load resonant converters using toroids with air gaps
- Overvoltages due to Wind Power - Hosting Capacity, Deterministic and Statistical Approaches
p
- Passive Filter Design for Three-Phase Inverter Interfacing in Distributed Generation
- Performance Evaluation of a Multifunctional Energy Metering IC under Sinusoidal and Non-Sinusoidal Conditions
- PFC units sizing in steel factory harmonics environment: a case study
- Physical Interpretation of the Reactive Power in Terms of the CPC Power Theory
- Power Electronics Harmonic Analysis Based on the Linear Time Periodic Modeling
- Power Injection Control System and Experimental Model based on Manufacturer Characteristic Curves for a Photovoltaic Generation
- Power Quality Enhancement of Three-PhaseFront-End Rectifier of UPS System Using Current Injection Technique
- Power Quality for Healthcare Facilities
- Power Quality in Internet Data Centers
- Power quality in medium & large commercial buildings
- Power Quality Indexes in an Agent-based Reconfiguration Strategy for Ship Power Systems
- Power Quality Monitoring System—Voltage Dips, Short Interruptions and Flicker
- Power Quality Regulation in Norway
- Power Quality: Interactions Between Distributed Energy Resources, the Grid, and Other Customers
- Powers of Asymmetrically Supplied Loads in Terms of the CPC Power Theory
- Practical issues in frequency disturbance recorder design for wide-area monitoring
- Predicting Harmonics by Simulations - A Case Study for High Power Adjustable Speed Drives
- Problems of Practical Diagnostics of Induction Machines in Industry
r
- Reduction of Electricity Costs and Investment Expenditures in the Power Supply System of a Lubin Mine
- Regulatory Control of Quality of Service Leads to Balanced Risk Based Decision Making
- Risk Evaluation of Results when Utilizing Software Simulations to Identify a Harmonic Offender in a Power System
- Rotor power loss in a PM SM by calculation, simulation and measurements, mutual verification of methods
s
- Single-phase power active filter using instantaneous reactive power theory – Theoretical and practical approach
- Sampled Method of Active Power Filter Control (Part II)
- Sampled method of active power filter control - part I
- Saving energy with high efficiency motors
- Sensitivity of electrical equipment to voltage sags and short interruptions: recommendations for testing
- Sensorless Control of Surface Mounted Permanent Magnet Synchronous Motors Using Matrix Converters
- Single Sensor Based Photovoltaic Maximum Power Point Tracking Technique for Solar Water Pumping System
- Solution Methods of Overhead Transmission Line Mechanics
- Some Idea on Energy Comsumption of Non-Linear Consumers
- Some observations regarding leading-edge dimmers
- Spectral Analysis of Signals of Commutator DC Motor
- Stochastic Estimation of Voltage Sag Due to Faults in the Power System by Using PSCAD/EMTDC Software as a Tool for Simulation
- Successful Power Quality Monitoring
t
- The Case of Hidden Instantaneous Powers
- The effect of the Integration Interval on the Measurement Accuracy of rms Values and Powers in Nonsinusoidal Regime
- The Evaluation of Medium Voltage Motor's Current and Voltage Harmonics During the Loading Conditions
- The Hilbert transform adaptation for measuring amplitude and phase low-frequency disturbances in power system voltage
- The Importance of Power Quality on Appliance Safety
- The Regional System of Monitoring Power Quality Parameters in Real Time
- The Solution of Solid Charge Direct Resistance Heating with Similarity Theory
- The Transition of the Grid - it's all in the mix
- The Use of the SSC as Reactive Power Compensator
- Three-level Modulation Techniques to Reduce Instantaneous Common Mode Voltage in Induction Machines
- Total Cost of Ownership for Real World Power Protection Infrastructure Comparing Centralized vs. Distributed Power Systems
- Transfiguration of supplied-by-HV/MV transformer network to the supply radius
- Troubleshooting the logic selectivity system of network protection
- 101210 page views this month
- 68659 email subscribers
- 4390 registered users
- 668 RSS readers (via feedburner)
