Solution Methods of Overhead Transmission Line Mechanics
By Isabelle Heriakian / Published on Mon, 2006-05-01 00:00Further reading
Paper is focused to mechanics calculation of overhead transmission lines. In first part of this paper is presented mathematical model for complex solution of overhead line mechanics in a plan. Non-level overhead line can be considered. The second part of paper deals with a solution method of the mechanics of overhead line conductors in three-dimensional space in non- level span. This method enables to define three-dimensional location, vector of mechanics stress of suspended line in optional point of line under combined load caused by the ice and the wind of optional direction.
Tagged with
Rating
Related content
- - Currents Physical Components in Circuits with Nonsinusoidal Voltages and Currents - Part 2: Three-Phase Linear Circuits
- - Sampled Method of Active Power Filter Control (Part II)
- - Experimental Investigations of the Upqc Arrangement
- - Grid Voltages Sensorless Control of the PWM Rectifier with Active Filtering
- - Power Electronics Harmonic Analysis Based on the Linear Time Periodic Modeling
People who read this also read
Popular content
- - Checklist for the electrical installation in the home
- - Report - Renewables Support Schemes and Grid Integration Policies
- - Virtual earthing electrode
- - What percentage of which car type (total 100%) do you expect in Europe in 2050? And ditto for 2020 and 2030?
- - Intelligent control of network-connected convertors






