Angelo Baggini received his degree in Electrical Engineering cum laude from University of Pavia in 1993; his thesis research work in CESI Metrological Lab, was awarded with the "AEI Stefano e Flora Badoni" prize by AEI (Associazione Elettrotecnica Italiana) From 1993 to 1994 he prosecuted is research work both in CESI Metrological Lab in Milan and in Electrical Engineerig Department of University of Pavia focusing on EMC and PQ aspects of electrical measurements and electrical machinery construction. He received his PhD in Electrical Engineering from University of Pavia in 1997. Since 1997 he is a member of CEI TC14 and form 2007 he is secretary of CENELEC TC14. He is currently aggregate professor of Electrical Engineering at University of Bergamo and international consultant in PQ field. Author of over 200 technical and scientific papers both on magazines and in national and international conferences either in the industry or at University.
Electricity is only of third-rate interest to hospitals.
The Handbook of Power Quality available in online bookshops since April 20
At the "Cogen Europe Annual Meeting", which took place in Brussels, Belgium on 22 May 2008,
Leonardo Energy is developing a toolset of calculation instruments in order to help designers with practical informat
This problem occurred in the installation shown in figure below
Electrical power is the most essential raw material used by industry today.
The increase in energy demand, the growing instability in energy supply and the EU CO2 emmissions reduction commitmen
The increase in energy demand, the growing instability in energy supply and the EU CO2 emmissions reduction commitmen
The increase in energy demand, the growing instability in energy supply and the EU CO2 emmissions reduction commitmen
The increase in energy demand, the growing instability in energy supply and the EU CO2 emmissions reduction commitmen
This publication by IEC summarizes the international standards work carried out by
The new EN 50464-1 Standard on three-phase oil-immersed distribution transformers 50 Hz, covering tr
This report presents the interim results of the international project Efficient Servers which is con
The World Energy Congress organised in Rome, Italy (11-15 November 2007) included a session on the r
New Decree 22/1/08 n. 37 (G. U. 12/3/08 n. 61) replacing 46/90 law has become effective.
During normal operation supply voltage is provided by the network to the load at rated value.
With linear loads and sinusoidal voltage supply, all waveforms are sinusoidal.
Motor driven systems account for approximately 50% of the electricity consumed in Europe.
Engineers normally face two tasks when designing earthing systems:
By Angelo Baggini, University of Bergamo
& Franco Bua, Engineering Consulting & Design
There are several available choices when designing a plant scheme, each one with different properties.
To achieve high reliability, the choice of the scheme for electrical distribution is of primary importance in electri
The growing diffusion of electronic devices imposes new requirements for earthing systems, which are a key element in